Math & Science ⇒ System of Equations

[Mohsen Avaji]

Hi
I am trying to write a few system of equations, and I want the terms to be similar as attached file "Part_of_a_book.png", but in my output number of items isn't similar to it.

Thanks in advance,
Mohsen Avaji.

Code: Select all

Code, edit and compile here:

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
·\documentclass{report}·
·\usepackage{mathtools}·
·\usepackage{systeme}·
·\usepackage{multicol}·
··\makeatletter·
·\@ifundefined{Umathcode}{\let\Umathcode\XeTeXmathcode}{}·
·\@ifundefined{Umathchardef}{\let\Umathchardef\XeTeXmathchardef}{}·
·\makeatother·
·\begin{document}·
·
·\begin{multicols}{2}·
·\begin{enumerate}·
·\item·
·$\sysdelim..\systeme{x+y+3z=5,2x-y+4z=11,-y+z=3.}$·
·\item·
·$\sysdelim..\systeme{3x+2y+z=1,5x+3y+3z=2,x+y-z=1.}$·
·\item·
·$\sysdelim..\systeme{3x+2y+z=1,5x+3y+3z=2,7x+4y+5z=3.}$·
·\item·
·$\sysdelim..\systeme{3x+2y+z=1,5x+3y+3z=2,7x+4y+5z=3,x+y-z=0.}$·
·\item·
·$\sysdelim..\systeme[xyzu]{3x-2y+5z+u=1,x+y-3z+2u=2,6x+y-4z+3u=7.}$·
·\item·
·$\sysdelim..\systeme[xyzu]{x+y-3z+u=5,2x-y+z-2u=2,7x+y-7z+3u=3.}$·
·\item·
·$\sysdelim..\systeme[xyzuv]{x+y+2z+3u+4v=0,2x+2y+7z+11u+14v=0,3x+3y+6z+10u+15v=0.}$·
·\item·
·$\sysdelim..\systeme[xyzu]{x-2y+z+2u=-2,2x+3y-z-5u=9,4x-y+z-u={}5,5x-3y+2z+u={}3.}$·
·\end{enumerate}·
·\end{multicols}·
·\end{document}·
 
 
הההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההה
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

Run LaTeX here

[cgnieder]

I don't know about the vertical alignment but two other points: you don't need to put \systeme{} in math mode and it is sufficient to call \sysdelim.. once:

Code: Select all

Code, edit and compile here:

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
\documentclass{report}
\usepackage{mathtools}
\usepackage{systeme}
\sysdelim..
\usepackage{multicol}
\begin{document}
\begin{multicols}{2}
\begin{enumerate}
  \item \systeme{x+y+3z=5,2x-y+4z=11,-y+z=3.}
  \item \systeme{3x+2y+z=1,5x+3y+3z=2,x+y-z=1.}
  \item \systeme{3x+2y+z=1,5x+3y+3z=2,7x+4y+5z=3.}
  \item \systeme{3x+2y+z=1,5x+3y+3z=2,7x+4y+5z=3,x+y-z=0.}
  \item \systeme[xyzu]{3x-2y+5z+u=1,x+y-3z+2u=2,6x+y-4z+3u=7.}
  \item \systeme[xyzu]{x+y-3z+u=5,2x-y+z-2u=2,7x+y-7z+3u=3.}
  \item \systeme[xyzuv]{x+y+2z+3u+4v=0,2x+2y+7z+11u+14v=0,3x+3y+6z+10u+15v=0.}
  \item \systeme[xyzu]{x-2y+z+2u=-2,2x+3y-z-5u=9,4x-y+z-u={}5,5x-3y+2z+u={}3.}
\end{enumerate}
\end{multicols}
\end{document}
 
 
הההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההה
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

Run LaTeX here

Regards

[Mohsen Avaji]

Dear Cgnieder, thank you for your time and cooperation.
But I don't know why in both cases, number of items is at the beginning of the second line, while I want the numbers be at beginning of fist line similar attached file (Part_of_a_book.png).

[Mohsen Avaji]

Hi
I found the answer of my question.

Code: Select all

Code, edit and compile here:

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
\documentclass{report}
\usepackage{mathtools}
\usepackage{systeme}
\usepackage{multicol}
\makeatletter
\@ifundefined{Umathcode}{\let\Umathcode\XeTeXmathcode}{}
\@ifundefined{Umathchardef}{\let\Umathchardef\XeTeXmathchardef}{}
\makeatother
\begin{document}
\begin{center}
\begin{tabular}{lp{1.5cm}l}
\sysdelim..\systeme{1.\quad x+y+3z=5,2x-y+4z=11,-y+z=3.} &&
\sysdelim..\systeme[xyzu]{5.\quad 3x-2y+5z+u=1,x+y-3z+2u=2,6x+y-4z+3u=7.} \\
&&\\
\sysdelim..\systeme{2.\quad 3x+2y+z=1,5x+3y+3z=2,x+y-z=1.} &&
\sysdelim..\systeme[xyzu]{6.\quad x+y-3z+u=5,2x-y+z-2u=2,7x+y-7z+3u=3.} \\
&&\\
\sysdelim..\systeme{3.\quad 3x+2y+z=1,5x+3y+3z=2,7x+4y+5z=3.} &&
\sysdelim..\systeme[xyzuv]{7.\quad x+y+2z+3u+4v=0,2x+2y+7z+11u+14v=0,3x+3y+6z+10u+15v=0.} \\
&&\\
\sysdelim..\systeme{4.\quad 3x+2y+z=1,5x+3y+3z=2,7x+4y+5z=3,x+y-z=0.} &&
\sysdelim..\systeme[xyzu]{8.\quad x-2y+z+2u=-2,2x+3y-z-5u=9,4x-y+z-u={}5,5x-3y+2z+u={}3.} \\
\end{tabular}
\end{center}
\end{document}
 
 
הההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההההה
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

Run LaTeX here

[cgnieder]

Thanks for posting you solution!

May I repeat myself nonetheless (emphasis added):

it is sufficient to call `\sysdelim..` once

Regards